Saturday, October 10, 2015

Door Work

Some pictures of the cabinet door work since it is not that interesting to take photos of paint and varnish coat number this or that. Coat 6 looks pretty much like coat 8. Finished spraying the hull this week so will post photos of that as well.


For cabinet doors I really like using loose tenons for construction. It has a lot of advantages such as simple and quick to make, very strong, and measuring out the rails and stiles is simpler. Plus it still feels like honest woodworking and not cheating. I make up lengths of lose tenon stock out of what ever hardwood I have in the shorts bin.


Fitting hinges. Not my favorite job. The hinges are set into the frame bead. Normally I would let in the hinges 50/50 but here I want the hing pin to line up in the bead to I set them in enough to give me a nice door gap and surface mount them on the door frame.


A pile of doors. There is a total of 20 doors and 4 drawers on the boat. You would not think there would be so many but they add up. The regular cabinetry are solid frame and panel with a bead around the frame. When deciding on the aesthetics for the boat I got a lot of inspiration from an old Wooden Boat article on the re-building of a Sardine Carrier "GRAYLING" by Doug Hylan. The cabinet doors and hardware (catches by Phoenix Lock) and settee backs are mainly inspired by studying those photos ( Wooden Boat Issues; 141 & 142 Mar/April 98 & May/June 98 ). I like a quote written in the article that said something to the extent that the router should not be an arbiter of taste. Hand shaping bulwarkcaps, bulkhead caps, counter edges and fiddles to a more pleasing oval shape is much nicer than a simple machined round over. 

Details of  "GRAYLING" can be seen here:
 http://www.pagetraditionalboats.com/grayling.htm


 The sail locker doors I decided to build with slats to promote air circulation. 


Some bead details around the starboard settee book shelf locker.


Construction detail of the galley sliding door frame. The top bead is set into a rabbet in the frame. The frame is joined with a bridle joint. I used raised finger holes for the sliding doors.


No comments:

Post a Comment